Termina la espera para los usuarios poseedores de estas consolas.
Una muy buena noticia para todos aquellos poseedores de una PS3 downgradeada con E3 Flasher, Progskeet o similar, ya que KADO ha publicado un parche que les va a permitir utilizar True Blue en sus consolas.
Instalación del parche:
1 - Dump your NOR flash using Progskeet first if you didn't have a good dump from your console.
2 - Download patch file attached to this thread.
3 - Extract this file and you will get 4 folders use patch in folder "Coba_2" to patch your dump using WinSkeet.
4 - Apply this patch to your dump then flash it to your console.
5 - Enter a Factory Service Mode using any method you like.
6 - Use TB CFW with Lv2diag.self to flash your TB CFW in FSM.
7 - Start your console normally, if it brick just dump this NOR flash again then patch again using "Coba_2" patch.
8 - If it still bricked use "Coba_3" patch to patch your dump again then flash it back to your console.
9 - Start console normally, now your console can run TB CFW on downgraded console.
10- Power off your console, plug your TB Dongle then power it on again and enjoy
2 - Download patch file attached to this thread.
3 - Extract this file and you will get 4 folders use patch in folder "Coba_2" to patch your dump using WinSkeet.
4 - Apply this patch to your dump then flash it to your console.
5 - Enter a Factory Service Mode using any method you like.
6 - Use TB CFW with Lv2diag.self to flash your TB CFW in FSM.
7 - Start your console normally, if it brick just dump this NOR flash again then patch again using "Coba_2" patch.
8 - If it still bricked use "Coba_3" patch to patch your dump again then flash it back to your console.
9 - Start console normally, now your console can run TB CFW on downgraded console.
10- Power off your console, plug your TB Dongle then power it on again and enjoy
0 comentarios:
Publicar un comentario